ElectricEyes
Basic &
Basic Plus
ElectricEyes
Basic & Basic Plus are the standards of the series providing
an affordable, reliable Digital Video System. As with all products
in the series, Basic &ElectricEyes Basic
& Basic Plus
Basic
Plus can be easily expanded and integrated into enterprise
systems.
The Electric
Eyes Basic uses UCC4
or UCC4A
(UCC4 with a`udio input jack) capture cards.
Electric
Eyes Basic Plus uses the UCC4P
capture cards. This card was introduced in late 2003 with the
following additions:
- Hardware
Synchronization - Provides steadier and better quality
video without compromising frame rates.
- TV-Out
and Audio - A feature new to the series is on-board TV-Out.
This means taking a real-time video feed directly from the board
to a TV screen. This feed is independent of the recording and
other Electric Eyes features and so has no affect on performance.
Users can select any one of up to sixteen cameras for TV display
or can sequence through selected cameras. There are two connections
on the board for TV-Out, one at the front and one at the back,
for convenience. An Audio input jack (for recording) is now
standard on this board.
Aside from
the differences above, Basic and Basic
Plus products have the same features. The following table
describes the individual products that make up the Basic
and Basic Plus part of the Electric
Eyes Series.
| Product
ID |
Capture
Cards |
Camera
Inputs |
Recording
Frame Rate* |
Audio
Channels 1 |
External
Alarm Inputs 2 |
Alarm
Outputs 3 |
| 104 |
1 |
4 |
2.5 |
1 |
4 |
3 |
| 208 |
2 |
8 |
2.5 |
2 |
8 |
3 |
| 416 |
4 |
16 |
2.5 |
4 |
16 |
3 |
1
Average frames per second per channel estimated on suggested PC
setup with four cameras displaying and one recording. Please note
that recorded frame rate depends on a lot of factors - activity
in front of the camera, activity on the Electric Eyes Server,
number of cameras displaying, number of cameras recording, CPU
speed, etc.
2
This is the number of audio inputs that come with the system,
any number of third party sound devices may also be added and
used for recording with Electric Eyes. Audio input not available
with UCC4 board
3
This is the number of standard on-board alarm inputs/outputs.
The number can be extended by using the UUSB controller available
from ElectricEyes.
If you would
like additional information please contact ElectricEyes at 306-347-0606
or info@electriceyes.com.
