1. To find
out what kind of mount for your CCTV lens, C, CS or board. It
depends on the camera that a lens works with. Check your camera
first.
Board lens
thread: M12x0.5, C or CS mount lens thread: 1-1/32”.
2. It is important to understand the angle of the lens. The angle
of view depends on the focal.
•
The larger the number focal, the narrower the angle of view.
• The sensor of camera (h×v ):
1”
sensor: 9.6mmx12.8mm
2/3” sensor: 6.6mmx8.8mm
1/2” sensor: 4.8mm X 6.4mm
1/3” sensor: 3.6mm x 4.8mm
¼” sensor: 2.7mm x 3.6mm
•
The formula:
F = v
X D /V or f = h X D /H
f: the length of focal
H: the height of the object
V: the width of the object
D: the distance between the camera and the object
h: the height of the sensor in camera
v: the width of the sensor in camera
Example 1, you want to watch an object 8ft wide (V) at 10
ft(D) with 1/3" camera (v=4.8mm). You need a 6mm focal
lens (4.8x10/8).
Example 2, you want to watch an object 8ft wide (V) at 165
ft(D) with 1/3" camera (v=4.8mm). You need a 100mm focal
lens (4.8x165/8).
That means the object is displayed by full screen on your
VGA monitor.
If you do not know where you like to see, you can choose a
varifocal lens, for example, 5-100mm, 6-60mm, 3.5-8mm, or
2.8-12mm, 5.5-33mm lens, etc. so that you can adjust the focal
to find the best view.
3. A 1" lens can work with a 1", 2/3", 1/2",
1/3" or 1/4" camera. A 2/3" lens can work with
a 2/3", 1/2", 1/3" or 1/4" camera. A 1/2"
lens can work with a 1/2", 1/3" or 1/4" camera.
A 1/3" lens can work with a 1/3" or 1/4" camera.
A 1/4" lens only can work with a 1/4" camera.
4. If you
need adjust the view of angle, you need choose a vari-focal lens.
Otherwise, you can choose a fixed lens to save money.
5. If the
light condition changes, you will need an auto-iris lens or a
manual-iris lens. An auto-iris lens can be adjusted iris by a
camera. A manual-iris lens can be adjusted iris by hand.
For example,
if you got an outdoor camera, an auto-iris lens may be what you
need. There are DC drives and video drive for auto–iris
lenses. Most cameras can support both drive types. It can be selected
by a switch on the camera.
6. If you like to see image when IR LEDs turn on, an IR lens would
work better.
7. If the
camera has a high resolution (>570TVL), a mega-pix lens will
give you a clearer image.
8. If you
like to see from a small hole, you can choose a pinhole lens.
9. If you
have a CS mount camera and a C mount lens, you need to place a
5mm adapter ( Item number: 280143930319 ) between the lens and
the camera. Otherwise, it will not work.
10. Extension
tubes( Item number: 280116508153) allow you to turn standard fixed
focal length lenses into macro lenses. An extention tube kit is
available which includes 7 extender tubes: 0.5 mm, 1 mm,2 mm,
5 mm, 10 mm, 20 mm and 40 mm for extension from 0.5 mm to 78.5
mm. The tube(s) mount between the camera and the lens, making
it possible for you to focus a C or CS mount lens at a much closer
distance than normal.
11. There
is a ring in front of most cameras so that you can adjust distance
between the lens and camera chip if you need.
Please feel
free to contact me if you have questions or suggestions.
